How to use the two-component caulking gun?

Two-component caulking gun is usually used for tile joints. The installation and use method can be divided into the following 4 steps.

  1. Prepare materials

Need to prepare two-component caulking gun, seam pressure stick, seam cleaning cone, beauty seam wax, caulking glue, spatula and other seam construction tools. When preparing the glue, it is necessary to determine the amount of glue according to the construction area. If the ambient temperature is low, in order to avoid the difficulty of glue release, the glue can be heated in a heating box or warm water.

  1. Dealing with brick joints

After the tiles are laid, there will be residual cement blocks at the joints of the bricks. First, insert the tip of the joint cleaning cone into the joints of the bricks, move the joint cleaning cone to smash the cement in the gap and push it out, and then use a vacuum cleaner and other tools to clean it up. clean. If the brick joints are found to be wet during construction, it is necessary to wait for the brick joints to dry before construction.

  1. Install the caulkinggun

Before installing the caulking gun, install the mixing tube on the caulk, then push the wrench of the two-component caulking gun forward, pull out the draw rod, load the assembled caulk, and press the wrench Test the glue effect.

  1. The use of the caulking gun

After installing the caulking gun, squeeze out a portion of the glue on the white paper before use, until the two-component caulk glue is mixed evenly. When using, put the glue nozzle of the caulking gun on the brick seam, press the handle of the glue gun to move it evenly, after the caulking glue is applied, press the seam with a seam stick, and use a spatula to fill the excess seam glue shovel off.

  1. The choice of the caulking gun

According to different construction requirements, the models of caulking guns are also different. Btektechshop provides caulking guns in various proportions, the 1:1 mixing ratio is the most commonly used, we also have other ratios of 2:1, 3:1, 4:1, 10:1 and different capacities to choose from.

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.